BAD-EPS Aluminum Enhanced Takedown and Pivot Pin Set

The BAD-EPS features the following improvements and features:

Precision Swiss CNC machined.
AR15 / M16 / M4 Compatible – Fits all AR15/M16/M4 lower receivers with mil-spec .250in diameter front pivot and rear take-down pin holes.
Patent Pending Pivot Pin & Take-down Pin Head Designs – Greatly improved gripping surface and pull strength without the use of oversize heads.
Low Profile Pin Heads – Low drag and never in the way. Lower profile than mil-spec pin heads.
Ambidextrous Safety Compatible – The Enhanced Take down Pin (BAD-ETP) head design does not obstruct the use of the right side ambidextrous safety selector lever.
Extended Pin Tips (+0.030in over mil-spec) – Added tip length noticeably aids in starting/pushing the pins out from the left side of the receiver, without undue protrusion.
Bullet Tip Guide – Cone shaped recess at both pin tips prevent accidental bullet or tool slip and reduced the chance of scratching/damaging of the receiver.

BAD-EPS comes with:

(1) Enhanced Takedown Pin
(1) Enhanced Pivot Pin
(2) KNS hardened stainless steel detents
(2) 17-7 nickel plated stainless steel pin springs.

Patent Pending EZ Guide Channel

Proudly designed and manufactured in the U.S.A.

Notes:

1. AX556 owners please note that the EPP (Enhanced Pivot Pin) is incompatible with the AX556 receiver due to the receiver’s proprietary design. The ETP (Enhanced Take-down Pin) will work as designed.

2. Depending on your M16 receiver, may not be compatible with the KNS anti-walk sear pin without modification to the KNS anti-walk sear pin.